Product
Product uses: electric power, metallurgy, petroleum, chemical industry, food, textile, paper making, pharmaceutical, waterworks and sewage treatment industries
Driving Energy: Electric Actuator
DKJ series actuators are driving devices for valve opening, closing or regulating control. They are suitable for butterfly valves, ball valves, cock valves and dampers which turn 90 degrees. This series of electric actuators can be controlled remotely or operated on site. It is widely used in electric power, metallurgy, petroleum, chemical industry, food, textile, paper-making, pharmaceutical, waterworks and sewage treatment industries.
DKJ series electric actuator is the terminal control device of industrial process measurement and control system. It can convert the control signal of the system into angular displacement and linear displacement of output shaft, control the position of closure parts such as valves or other adjusting mechanism, and make the controlled medium work according to the specified state of the system. The electric actuator can be divided into feedback and regulation according to the control mode. The regulated actuator is composed of an electric servo amplifier and an integral actuator. It can compare the control signal of the system with the feedback signal about the position of the output shaft (closed-loop control) to change the stroke of the output shaft and make it proportional to the output signal. Feedback actuator is composed of servo motor, reducer and position transmitter. It can cooperate with electric operator to realize remote operation of valve or other regulating mechanism.
DKJ angular stroke electric actuator (outdoor, electronic, flameproof, flameproof electronic type see table below):
Model 0-10mA Model 4-20mA Torque Travel Time Second/90 Degree
DKJ-210 DKJ-2100 100Nm 25
DKJ-310 DKJ-3100 250Nm
DKJ-410 DKJ-4100 600 Nm
DKJ-510 DKJ-5100 1600 Nm
DKJ-610A DKJ-6100A 2500 Nm 40
DKJ-610 DKJ-6100 4000 Nm 60
DKJ-710 DKJ-7100 6000 Nm 100
DKJ series electric actuators are manufactured in accordance with the provisions of the National Standard GB11922-89 of the People's Republic of China, Electric Actuators for Industrial Process Measurement and Control Systems.
1. Input Signal: General: Switching Volume
2. Input channel resistance: 250 ohms or 200 ohms
3. Number of input channels: 3 conventional amplifiers and 1 electronic amplifier
4. Basic error: 2.5%
5. Backlash: <1.5%
6. Dead zone: <3%
7. Damping characteristics: <3 half-period
8. Power supply voltage: 220V or 380V, 50Hz
9. Working environment: temperature: -100 C-+550 C, humidity: <95%, the surrounding air does not contain corrosive properties.
.png)
0514-85862666
